Toshiba 40L5400 Series - Other Features Settings

25
Using the TV’s features
Position: Set the position that will be tuned
when the TV turns on.
Volume: Select the volume level that will be set
when the TV turns on.
4 When all the details have been entered, select
Done and press OK to start the timer.
To cancel the On Timer
1 From the On Timer menu, press  or  to
select Enable On Timer.
2 Press  or  to select O , and then select
Done and press OK.
NOTE:
The TV will automatically turn itself o after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
Setting the Sleep Timer
The Sleep Timer is especially useful if you want the
TV to turn itself o after a selected period of time.
1 From the APPLICATIONS menu, press  or 
to select Sleep Timer.
2 Press the Number buttons (0-9) to enter
the amount of time until the TV turns o .
Alternatively, press  or  to adjust the time in
blocks of 10 minutes up to 12 hours.
3 Press EXIT to start the timer.
To cancel the Sleep Timer, enter all zeros for the
step 2.
Using the Continuous Viewing Timer
To prevent watching TV continuously for long
periods of time, you can set a message to appear
that suggests that the viewer takes a break. This
is especially useful for stopping children from
watching TV for long periods of time.
1 From the APPLICATIONS menu, press  or 
to select Continuous Viewing Timer.
2 Press  or  to select 60 min, 120 min, 180
min or O .
When the set time has passed, a message
suggesting the viewer takes a break appears.
Press OK, BACK or EXIT to clear the message.
NOTE:
• If the power is turned o before the set amount of
time has passed, the timer is reset.
• If the set amount of time is changed, the timer is
reset.
Using the Dynamic Range Control
This feature allows control of compression for Dolby
Digital and Dolby Digital Plus.
1 From the SOUND menu, press  or  to select
the Dynamic Range Control.
2 Press  or  to select On or O .
NOTE:
When the Dynamic Range Control is set to On, the
Audio Distortion Control changes to O .
Using the Audio Level O set
Sometimes there can be large changes in volume
when switching from an ATV channel or an external
input. Using this feature reduces these volume
di erences.
1 From the SOUND menu, press  or  to select
the Audio Level O set.
2 Press  or  to adjust the settings as desired.
Other features settings
Setting the On Timer menu
The feature allows you to set the TV to turn on
automatically to a preset position or input.
1 From the APPLICATIONS menu, press  or 
to select On Timer, and then press OK.
2 Press  or  to select Enable On Timer, and
then press  or  to select On.
On Timer
Enable On Timer
Done
On
Power On Time 00:00
Repeat Once
Input TV
Position 55
Volume
30
3 Press  or  to go through the list adding the
details of the On Timer by using the Number
buttons and  or  to make selections and
press OK.
Power On Time: Set the time you prefer with
the number buttons.
Repeat: Select the desired On Timer operation
(Once, Every Day, Mon- Fri, Mon-Sat, Sat-
Sun).
Input: Select a video input source (TV, EXT 1,
EXT 2, HDMI 1, HDMI 2, HDMI 3 or PC).
32404755L5400SeriesEn.indd2532404755L5400SeriesEn.indd25 2014/07/2417:06:262014/07/2417:06:26