Toshiba 40L5400 Series - Pedestal Stand Assembling

3
Introduction / Getting started
Pedestal stand Assembling
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a  at,
cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the
surface and assemble as indicated.
NOTE:
Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
Warning: Ensure the power cable is not pinched
when attaching the pedestal stand as this could
cause an electric shock.
32L5400 Series
1
4
3
2
M5 × 2
M4 × 4
32404755L5400SeriesEn.indd332404755L5400SeriesEn.indd3 2014/07/2417:06:202014/07/2417:06:20