Toshiba 40L5400 Series - Page 13

13
Introduction / Getting started
6 Press OK to display the Intelligent AutoView
menu (- page 20).
Press  or  to select Ye s or No.
Intelligent AutoView
NoYes
Intelligent AutoView mode automatically adjusts picture settings
to suit ambient light conditions. Do you wish to enable Intelligent
AutoView mode?
• When you select No, skip to step 8.
7 Press OK to display the Lighting Type menu.
Press  or  to select Fluorescent Light or
Light Bulb.
• Set the ambient light environment to help
Intelligent Auto View function more
e ectively (- page 20).
Lighting Type
Fluorescent Light Light Bulb
To use the TV under the bluish lighting environment, please select
[Fluorescent Light]. To use the TV under the orangish lighting
environment, please select [Light Bulb].
8 Press OK to display the Auto Tuning menu, and
then  or  to select On or O .
Auto Tuning
Auto Signal Booster
Start Scan
On
9 Select Start Scan and press OK to start the
automatic search.
Auto Tuning
1% 0
Progress Found
When the automatic search is completed,
the TV will automatically appear the Manual
Tuning menu.
Use the Manual Tuning operation if desired
channels cannot be preset with the Auto
Tuning or if you would like to preset channels
to speci c position numbers one by one.
Manual Tuning
Pos.
0
1
2
3
4
5
6
7
Label
10 Press  or  to select the programme position
you want to arrange and press OK to display the
breakdown menu.
Press  or  to select an item, then press  or
 to select the item as shown below.
Manual Tuning
Position
1 B/G A 01C On
AC G I
J
HD
E
FB
A. Position selection
B. System (Sound) (
-
page 59)
C. Colour System (
-
page 59)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the automatic colour system selection (A)
may have malfunctioned, or sound system
selection is wrong. In such a case, select
another colour and/or sound system (
-
page 59).
D. Position skip selection
Press

or

to turn the position skip option
on “
8
” or o “
(
”. The position will then be
skipped when you select channels with P
U
or P
u
. The “
8
” mark will appear beside a
position number when you use the Number
button on the remote control.
E. Signal Class
The channel classi cation.
F. Channel
The channel number on which a station is
being broadcast.
32404755L5400SeriesEn.indd1332404755L5400SeriesEn.indd13 2014/07/2417:06:242014/07/2417:06:24