Toshiba 46XV700A - Connecting your TV; Back Panel Connections

39
Back connections
Connection example
1 43
RGB
/PC
COMPONENT
VIDEO INPUT
COMPONENT
VIDEO INPUT
S-VIDEO
VIDEO
VIDEO
WOOFER
(VARIABLE)
PC/HDMI 3
(AUDIO)
AUDIO
R
Y
L
P R /C R
P B /C B
Y
P R /C R
P B /C B
MONITOR
Back of TV
DVD video player
(with component video outputs)
Set Top Box
VCR (Recording)VCR (Normal)
Woofer system
with amplifier
• Beforeconnectinganyexternalequipment,turnoffall
main power switches�
• TheunauthorizedrecordingofTVprogrammes,DVDs,
video tapes and other materials may infringe upon the
provisions of copyright law�
• IfyouconnecttoboththeS-VIDEOinputterminaland
VIDEO input terminal, the S-VIDEO signal will appear
on the screen (display changes to
o
1S)
• The
COMPONENT VIDEO INPUT
consists of
three component video signals (
Y
,
P
B
/C
B
,
P
R
/C
R
) and
provides better picture performance� These terminals
can only be used with component video compatible
equipment e�g� DVD video player, etc�
• Additionalequipmentandcablesshownarenotsupplied
with this TV�
Selecting the Woofer
Connect an external woofer to the Woofer output terminal
located on the rear of the TV�
1
From the
AV Connection
menu, press
s
or
r
to
select
Woofer
�
2
Press
v
or
w
to select
Internal
or
External
�
Internal
: Select to use the Dynamic Bass Boost�
External
: Select to use an external woofer system�
Connecting an audio system
- digital -
You can enjoy high quality dynamic sound by connecting
the TV to an audio system�
Notes:
• DO NOT connect the
DIGITAL AUDIO
output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the
DIGITAL AUDIO
output terminal to the
OPTICAL
input of a receiver or processor.
• Refer to the owner’s manual of the connected
equipment as well.
• When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifier’s
volume to a moderate listening level before turning
on the power. Otherwise, the speakers and your
hearing may be damaged by sudden high volume
audio.
• Turn off the amplifier before you connect or
disconnect the TV’s power cord. If you leave the
amplifier power on, the speakers may be damaged.
Warning:
When you are connecting (via the
DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set
PCM
for Digital Output menu (
-
page 38). Otherwise,
the speakers and your hearing may be damaged by
sudden high volume audio.
Connecting an amplifier equipped with a
Dolby Digital decoder
To Digital Audio
output terminal
To Optical type
digital audio input
Optical digital cable
(not supplied)
Amplifier equipped with
Dolby Digital decoder
Back of TV
Front speaker Surround speaker Sub woofer
Centre speaker Signal flow
DIGITAL
AUDIO
You can enjoy dynamic realistic sound by connecting the
TVtoanamplierequippedwithaDolbyDigitaldecoder
or Dolby Digital processor� When using this setup, select
Auto
in the Digital Output menu�
Connecting your TV