Toshiba 46XV700A - Connecting an Hdmi Device; Connecting a Hdmi Audio System; Connecting a DVI Device

41
Connecting your TV
•
Acceptable PC signal format
:
S-VGA: VESA 800
5
600@56/60/72/75Hz
XGA: VESA 1024
5
768@60/70/75Hz
W-XGA: VESA 1280
5
768@60/75Hz
W-XGA: VESA 1360
5
768@60Hz
S-XGA: VESA 1280
5
1024@60/75Hz
However, these signal formats are converted to match
the number of pixels of the LCD panel�
Therefore, the TV may not display small text properly�
•
Supported Audio format
:
L-PCM,DolbyDigital,samplingrate32/44.1/48kHz
•
L-PCM
: Linear-Pulse Code Modulation
Connecting a HDMI audio system
One HDMI cable (type A connector) is needed�
1
(
ARC
)
2 31
(
ARC
)
2 3
Back of TV
AV amplifier corresponding to ARC
HDMI’s ARC (Audio Return Channel) feature
This feature enables the audio signal of the TV to be sent
totheAVamplierviatheHDMIcable.Itwillnotbe
necessary to connect a cable from the audio output of the
TVtotheaudioinputoftheAVampliertoreproducethe
audio received from the tuner of the TV through the AV
amplier.
Connecting an HDMI device
One HDMI cable (type A connector) is needed�
1
(
ARC
)
2 31
(
ARC
)
2 3
VIDEO AUDIO
L R
IN
OUT
HDMI OUT
USB 1 HDMI4 (2)
Back of TV
Right side of TV
HDMI device
For proper operation, it is recommended that you use a
short HDMI cable�
HDMI cable transfers both video and audio�
Note:
It is possible that some HDMI devices may not
operate properly with this TV.
Connecting a DVI device
One HDMI (type A connector) -to-DVI adapter cable and
analogue audio cables are needed�
VIDEO AUDIO
L R
IN
OUT
DVI
OUT
1
(
ARC
)
2 3
PC/HDMI 3
(AUDIO)
DVI device
Back of TV
Back of TV
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 3m� The recommended
length is 2m�