Toshiba 46XV700A - Side Panel Connections; Connecting HDMI and DVI Devices

40
Connecting your TV
Connecting an amplifier equipped with a
digital audio (optical) input
DIGITAL
AUDIO
Front speaker Signal flow
To Digital Audio
output terminal
To Optical type
digital audio input
Optical digital cable
(not supplied)
Amplifier equipped with
digital audio input
Back of TV
You can enjoy the dynamic sound of a 2-channel digital
stereobyconnectingtheTVtoanamplierequippedwith
a digital audio (optical) input and speaker system (right
and left front speakers)� When using this setup, select
PCM
in the Digital Output menu�
Side connections
You can connect a wide variety of auxiliary equipment via
the terminals located on the right side of the TV
o
(2)
�
Please always refer to the owner’s manual of the equipment
to be connected for full details�
Connection example
(2)
Right side of the TV
Video GamesCamcorder
Camcorder with
S-Video
R
L
• Toselectthesideinputs,press
o
to display the video
input mode list, press
s
or
r
to select
o
2 (
-
page
30), and then press
Q
�
• Beforeconnectinganyexternalequipment,turnoffall
main power switches�
• YoucanenjoyvideogameswiththisTV.However,
shooting games, where the player shoots at a target on
the TV screen with a light gun may not work because of
the properties of the LCD Colour TV�
Connecting HDMI and DVI devices
• Whenturningonyourelectroniccomponents,turnon
theTVrst,andthentheHDMIorDVIdevice.
• Whenturningoffyourelectroniccomponents,turnoff
theHDMIorDVIdevicerst,andthentheTV.
• ThisTVmaynotbecompatiblewithfeaturesand/or
specicationsthatmaybeaddedinthefuture.
• ThisTVisonlyoperablewithL-PCMandDolby
Digitalon32/44.1/48kHz.Ifthereisnosoundwhen
using HDMI, use the analogue audio cables to connect
the TV and the HDMI device and select
Analogue
for
HDMI 3 Audio
of the
AV Connection
menu
(
-
page 42)�
Connecting HDMI and DVI devices
The HDMI input on your TV can receive digital audio and
uncompressed digital video from an HDMI device and
uncompressed digital video from a DVI device�
This input is designed to accept HDCP programme
material in digital from CEA-861-D compliant consumer
electronic devices (such as a set top box and DVD player
with HDMI and DVI output)�
The HDMI input is designed for best performance with
1080i(50Hz/60Hz),1080p(24Hz/50Hz/60Hz)high-
denitionvideosignals,butwillalsoacceptanddisplay
480i,480p,576i,576p,720p(50Hz/60Hz)andVGA
(VESA640×480@60/72/75Hz)signals.
•
HDMI
:High-DenitionMultimediaInterface
•
DVI
: Digital Video Interface
•
HDCP
: High-bandwidth Digital Content Protection
• CEA-861-Dcompliancecoversthetransmissionof
uncompressed digital video with high-bandwidth
digitalcontentprotection,whichisbeingstandardized
forreceptionofhigh-denitionvideosignals.Because
this is an evolving technology, it is possible that some
devices may not operate properly with the TV�