Toshiba 46XV700A - Using the PC Settings; REGZA-LINK Connection; Adjusting the Picture Position

44
Connecting your TV
Using the PC Settings
• Mostofthepicturecontrolsandfunctionsareavailable
in both digital and analogue modes� However, features
not available will be greyed out�
• First,press
o
to display the video input mode list, and
then press
s
or
r
and
Q
in order to select PC input
mode (
-
page 30)�
• ThePCSettingsfunctionmaynotbeavailableforsome
signals and when no signal is received�
• Incertaincases,itmaybedifculttooptimallysetthe
clock phase and sampling clock values depending on the
input signal type�
Adjusting the picture position
1
From the
Display Settings
in the
PREFERENCES
menu, press
s
or
r
to select
PC Settings
�
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
2
Press
Q
to display the
PC Settings
menu�
0
0
0
0
PC Settings
Horizontal Position
Reset
Sampling Clock
Vertical Position
Clock Phase
3
Press
s
or
r
to select the option you want to adjust�
Press
v
or
w
to adjust the settings as desired�
Horizontal Position
0
Adjusting the clock phase of the picture
Iftheclockphase,whichsynchronizesthePCsignaland
LCDdisplay,isnotoptimized,thepicturewillblur.
This function allows you to adjust clock phase and display
a clear picture�
1
From the
PC Settings
menu, press
s
or
r
to select
Clock Phase
�
2
Press
v
or
w
to obtain a clear picture�
Clock Phase
0
Adjusting the sampling clock
If the sampling clock does not match with the dot clock
frequency of the PC, picture details will be blurred, screen
width will change, or drift patterns in vertical lines may be
apparent�
Thisfunctionallowsyoutoadjustandoptimizethe
picture�
1
From the
PC Settings
menu, press
s
or
r
to select
Sampling Clock
�
2
Press
v
or
w
tooptimizethepicture.
Sampling Clock
0
Resetting the PC Settings
The Reset function adjusts the PC Settings to the factory
settings�
1
From the
PC Settings
menu, press
s
or
r
to select
Reset
�
2
Press
Q
�
Note:
When a PC is connected using HDMI, none of these
functions will be available.
REGZA-LINK connection
You can control the basic functions of connected audio/
video devices using the TV’s remote control if you connect
a REGZA-LINK compatible audio receiver or playback
device� For an explanation of setup and operations
(
-
pages 32, 33)�
Before controlling the device(s):
• Aftercompletingtheaboveconnections,setthe
REGZA-LINK Setup menu as you desire (
-
page 33)�
• Theconnecteddevicesmustalsobeset.Fordetails,see
the owner’s manual for each device�