4 SETUP AND PREPARATION BEFORE OPERATION
4.6 Station Number Setting
The station number setting of the AJ65VBTCU-68ADVN/ADIN determines the buffer
memory addresses of the master module where the remote I/O signals and read/write
data are stored.
For details, refer to the user's manual of the master module used.
4.7 Facing Direction of the Module Installation
The AJ65VBTCU-68ADVN/ADIN module may be installed in any of six orientations
using a DIN rail or CC-Link connector type fitting.
(There are no restrictions on the facing directions.)
DIN rail
Front installation
Flat installation
Ceilling installation
To Next Page
Loading...
