Toshiba B-SX6T Series Supply Loading Instructions

6
11. There are three issue modes available on this printer. How to set the media for each mode is provided below.
In the batch mode, the media is continuously printed and fed until the number of labels/tags specified in the issue
command have been printed.
(1) Pull the media past the media outlet.
Turn the Pinch Roller Lever counterclockwise to lock the Pinch Roller.
(2) Close the Top Cover and Right Side Cover.
When the optional Strip Module is fitted, a label is automatically removed from the backing paper at the Strip
Plate as each label is printed.
(1) Pull out the backing paper past the Media Outlet.
(2) While holding down the Backing Paper Release Bar, and pass the backing paper between the Backing Paper
Holder and the Strip Roller. Then, release the Backing Paper Release Bar.
(3) Turn the Pinch Roller Lever counterclockwise to lock the Pinch Roller.
Close the Top Cover and Right Side Cover.
Batch mode
Stri
p
mode
(
O
p
tion
)
Media Outlet
Pinch Roller Lever
Media Outlet
Backing Pape
r
Release Ba
r
Backing Paper
Backing Pape
r
Strip module
Strip Roller
Backing Paper
Holder
Pinch Roller Lever
Right Side Cover
Top Cover
When the Backing Paper Release Bar is released, it is
automatically closed by the spring. Care must be
taken not to pinch your fingers or hands.
ATTENTION!
Lorsque vous relâchez la barre du contre rouleau, un
ressort la ramène automatiquement en position.
Attention de ne pas vous faire pincer les doigts ou
les mains.
WARNING!

Toshiba B-SX6T Series Specifications

General

Brand	Toshiba
Model	B-SX6T Series
Category	Printer
Language	English