Toshiba TEC B-SX4T Series User Manual

PRINTED IN JAPAN
TEC Thermal Printer
B-SX4T/SX5T SERIES
Document No.
EO18-33012B
Original
Jan., 2003
(Revised
Feb., 2003
Jan., 2006
)
Maintenance Manual
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es

Toshiba TEC B-SX4T Series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Ribbon Length	450 m
Resolution	203 dpi
Max Print Width	104 mm
Optional Interfaces	Wireless LAN (IEEE 802.11b/g)
Memory	16 MB DRAM, 4 MB Flash ROM
Media Type	Continuous, die-cut labels, tags, receipts
Media Thickness	0.0635 mm to 0.254 mm
Supported Barcode Types	QR Code, Data Matrix, PDF417
Power Supply	AC 100 to 240V, 50/60 Hz
Interface	Parallel port (IEEE1284), Serial port (RS-232C), LAN (10/100BaseT)

Summary

PRINTER INSTALLATION

NOTE FOR OPTIONAL EQUIPMENT INSTALLATION /MAJOR UNIT REPLACEMENT/MAINTENANCE

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

SWING CUTTER (B-4205-QM)

Procedure for installing the B-4205-QM Swing Cutter optional module.

ROTARY CUTTER (B-8204-QM)

Procedure for installing the B-8204-QM Rotary Cutter optional module.

STRIP MODULE (B-9904-H-QM)

Procedure for installing the B-9904-H-QM Strip Module optional device.

RIBBON SAVING MODULE (B-9904-R/R2-QM)

Procedure for installing the B-9904-R/R2-QM Ribbon Saving Module optional device.

PCMCIA INTERFACE BOARD (B-9700-PCM-QM)

Procedure for installing the B-9700-PCM-QM PCMCIA Interface Board.

USB INTERFACE BOARD (B-9700-USB-QM)

Procedure for installing the B-9700-USB-QM USB Interface Board.

LAN INTERFACE BOARD (B-9700-LAN-QM)

Procedure for installing the B-9700-LAN-QM LAN Interface Board.

EXPANSION I/O INTERFACE BOARD (B-7704-IO-QM)

Procedure for installing the B-7704-IO-QM Expansion I/O Interface Board.

RIBBON SAVING MODULE AND ROTARY CUTTER (For B-SX4T Series)

Instructions for installing Ribbon Saving Module and Rotary Cutter together.

RFID MODULE (B-9704-RFID-U1-US/EU/EU-R)

Procedure for installing the B-9704-RFID-U1-US/EU/EU-R RFID Module.

RFID MODULE (B-9704-RFID-H1-QM/QM-R)

Procedure for installing the B-9704-RFID-H1-QM/QM-R RFID Module.

SWING CUTTER (B-4205-QM-R)

Procedure for installing the B-4205-QM-R Swing Cutter optional module.

ROTARY CUTTER (B-8204-QM-R)

Procedure for installing the B-8204-QM-R Rotary Cutter optional module.

STRIP MODULE (B-9904-H-QM-R)

Procedure for installing the B-9904-H-QM-R Strip Module optional device.

RIBBON SAVING MODULE (B-9904-R2-QM-R)

Procedure for installing the B-9904-R2-QM-R Ribbon Saving Module optional device.

PCMCIA INTERFACE BOARD (B-9700-PCM-QM-R)

Procedure for installing the B-9700-PCM-QM-R PCMCIA Interface Board.

USB INTERFACE BOARD (B-9700-USB-QM-R)

Procedure for installing the B-9700-USB-QM-R USB Interface Board.

LAN INTERFACE BOARD (B-9700-LAN-QM-R)

Procedure for installing the B-9700-LAN-QM-R LAN Interface Board.

EXPANSION I/O INTERFACE BOARD (B-7704-IO-QM-R)

Procedure for installing the B-7704-IO-QM-R Expansion I/O Interface Board.

WIRELESS LAN MODULE (B-9700-WLAN-QM-R)

Procedure for installing the B-9700-WLAN-QM-R Wireless LAN Module.

RFID MODULE (B-SX704-RFID-U2-EU-R)

RFID MODULE (B-SX704-RFID-U2-AU-R)

RFID MODULE (B-SX704-RFID-U2-US-R)

SYSTEM MODE

SELF-DIAGNOSTIC TEST

PARAMETER SETTING

PRINTER PARAMETER FINE ADJUSTMENT

RFID Module Setting

PROGRAM DOWNLOAD

DOWNLOAD PROGRAM INSTALLATION

FIRMWARE DOWNLOAD

PERIODIC MAINTENANCE PROCEDURE

TROUBLESHOOTING

MAJOR UNIT REPLACEMENT

POWER SUPPLY UNIT

MAIN PC BOARD

PANEL PC BOARD AND LCD UNIT

STEPPING MOTOR

RIBBON MOTORS (TAKE-UP, FEED)

RIBBON MOTOR SENSORS (TAKE-UP, FEED)

PRINT HEAD

PLATEN

FEED ROLLER

PINCH ROLLER ASS’Y

MEDIA SENSORS (UPPER, LOWER)

HEAD UP SENSOR

PRINTER OPEN SENSOR

RIBBON END SENSOR

FAN MOTOR

RFID ANALYZE TOOL

Operating Procedure