29
No.
4
5
Item
Automatic
capacity control
Outline of specifications
1) Based on the difference between Ta and Ts, the
operation capacity is determined by the outdoor unit.
Remarks
1) Operation with (HH), (H), (L) or [AUTO] mode is carried
out by the command from the remote controller.
2) When the air speed mode [AUTO] is selected, the air
speed varies by the difference between Ta and Ts.
<COOL>
Air speed
selection
Ts: Setup temp.
Ta: Room temp.
HH > H+ > H > L+ > L > UL
Ta
˚F (˚C)
+3.6 (+2)
Ta
˚F (˚C)
+1.8 (+1)
+1.8 (+1) Ts
Ts –1.8 (–1)
–1.8 (–1) –3.6 (–2)
COOL HEAT
S3
S5
S7
S9
SB
SD
SF
S0
SD
SB
S9
S7
S5
S3
S0
• Controlling operation in case when thermo of
remote controller works is same as a case when
thermo of the body works.
• If the air speed has been changed once, it is not
changed for 3 minutes. However when the air
volume is exchanged, the air speed changes.
• When cooling operation has started, select a
downward slope for the air speed, that is, the high
position.
• If the temperature is just on the difference bound-
ary, the air speed does not change.
Code No. 32
0000: Body thermo.
(Main unit)
0001: Remote controller
thermo.
Ta ˚F [˚C]
+5.4 [+3.0]
+4.5 [+2.5]
+3.6 [+2.0]
+2.7 [+1.5]
+1.8 [+1.0]
+0.9 [+0.5]
Tsc
–0.9 [–0.5]
HH
<HH>
H+ <HH>
H <HH>
L+ <H+>
L <H>
L <H>
L <L+>
< > : Indicate automatic cooling.
D
C
B
A
E
F
G
To Next Page
Loading...
Need help?
General
