Ŷ
High power operation
High power (Hi POWER)
• The Hi POWER (high power operation) mode
automatically controls room temperature, airÀow
and operation mode so that the room is quickly
cooled in summer and warmed in winter.
SWING
FAN
FIX
QUIET
Hi POWER
Setting Hi POWER mode
Hi POWER button
Press the Hi POWER button after starting any
operation. At the same time, the “Hi POWER” mark
on the remote controller is indicated.
Cancelling Hi POWER mode
Hi POWER button
Press the Hi POWER button once again. At the same
time, the “Hi POWER” mark on the remote controller
goes out.
CAUTION
• The Hi POWER mode cannot be activated in the
DRY and FAN ONLY operation and when
the ON TIMER operation is reserved.
• Hi POWER mode is not available for group
control.
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
Ŷ
Quiet operation
• The QUIET mode provides quiet operating status
by automatically setting the fan speed to the
lowest speed.
SWING
FAN
FIX
QUIET
Hi POWER
Setting QUIET mode
QUIET button
Press the QUIET button after starting any operation.
At the same time, the mark is indicated.
Cancelling QUIET mode
QUIET button
Press the QUIET button once again.
At the same time, the mark on the remote
controller disappears.
CAUTION
The QUIET mode cannot be activated in the
DRY operation.
NOTE
Under certain conditions, the quiet operation may
not provide adequate cooling or heating due to the
feature of quietness.
– 20 –
20-EN
EN
Owner’s Manual
Carrier 1121250221.indb 20Carrier 1121250221.indb 20 9/26/22 11:15 AM9/26/22 11:15 AM
To Next Page
Loading...
