3. Wipe out water from the air inlet grille and dry it.
4. Fit the left and right arms of the air inlet grille to
the shafts on the two sides of the air conditioner
and push in completely, and then push in the
centre arm.
5. Check that the centre arm has been completely
inserted and close the air inlet grille.
• Push the arrow locations (Three) at the bottom
of the air inlet grille to check whether the grille
is completely closed.
– 28 –
28-EN
EN
Owner’s Manual
Carrier 1121250221.indb 28Carrier 1121250221.indb 28 9/26/22 11:15 AM9/26/22 11:15 AM
To Next Page
Loading...
