Toshiba Carrier RBM-A0601UPVA-UL - Construction Views (External Views)

2. CONSTRUCTION VIEWS (EXTERNAL VIEWS)
TCB-IFDMR01UP-UL
(Unit: in (mm))
Ground screw
Terminal block (3p)
(Power supply)
Clamp
(For power supply)
16.9" (430)
4-Ø 15/32" (12) Mounting wall
(Accessories No.11)
Sensor connection port
(Local connecting)
Terminal block
There are two types.
Passing Temperature
sensor leads, through
a clamp ter.
(TA, TC2, TF, TCJ, TC1)
CLABLE-GLAND (6 piece)
• Installation space and maintenance space
Upper side when installed.
Wall
Note)
• This product is designed for the indoor installation.
• If the temperature sensor is short, use the Optional Sensor
TCB-IFDES1001P-UL.(Temperature sensor with 10 m wiring length)
• If any conduits are not in use, Please apply silicone to cover the conduits.
• Before closing the conduits cover. wrap the wircs heat insulation.
(Accessories No.10)
15.7" (400)
0.8" (20)18" (460)
19.7" (500)
MCC-1777
0.5" (14.6)
Sensor (TC1, TC2, TCJ, TA,
TF)(accessory)
8" (200)
0.5" (13)
3.5" (90)
7.9" (200)
2-PG16
Power supply
Output
Input
Valve kit
Remote controller
inter-unit
Sensor
4-PG13.5
19.7" (500) or more
Wall
Wall
2" (50 mm) or mor
Floor
2" (50 mm) or more
2" (50 mm) or more
7.9" (200) or mor
2"
(50)
2"
(50)
4"
(50)
2"
(50)
2"
(50)
2"
(50)
2"
(50)
Heat Insulation
(Accessory No.10)
Heat Insulation
(Accessory
No.10)
Heat Insulation
(Accessory
No.10)
Step 1 Step 2 Step 3
- 14 -