6
7
Press ADV to lock out the channel.
The display at the right will appear on the
screen for about 4 seconds.
CH 4
LOCKED
1234
Repeat steps 1 to 6 for other channels.
This TV has 8 memory spaces total, 4 for the TV mode and 4 for
CABLE mode respectively.
Note: If a different code number is used whenever you lock out a
channel, the last one has priority over the preceding ones.
8 Select another channel before turning off the TV.
Select "CLEAR" following steps 2 to 4
on the previous page.
CH LOCK CABLE
CLEAR ....
0 0 15 4
TO SELECT PUSH - +
TO ENTER 4-DIGIT CODE
PUSH 0-9
TO SET PUSH ADV
1
{/}
m
t-
i-
t_
J=
O}
e-
tj
o
_J
2 Enter the 4-digit code used to lock out the channels with the Number
buttons.
3
Press ADV.
If you have entered the correct code
The display shown at the right appears.
CLEARED
1234
If a wrong code has been entered
These messages appear. Try to enter the
correct code again.
WRONG CODE
LENTER CORRECT CODE
If you want to know the channels you have locked out
Call up the channel lock adjustment mode using the SET UP menu.
31
To Next Page
Loading...
Need help?
General
