28
User setup
To set User numbers start your command SMS with “91”, followed by
the mobile phone number of the User. For example: “91+495012345” or
“915012345” to enter User1 number where “5012345” is the cell phone
number of User1 and +49 is the country code. User numbers (Owner,
User1, User2) can be international (with the “+” symbol and country code)
or local. The length of the number must be between 3-16 symbols
(“+” counts as one symbol). Multiple commands can be combined into one
SMS. When a User has been set, Combi Control responds with a SETUP
report message.
Setup SMS command you send Controller function you activate
91xx* User1 number entry (to delete: 910)
92xx* User2 number entry (to delete: 920)
93xx* Owner number entry (to delete: 930)
*xx marks the place of mobile phone number
To Next Page
Loading...
