8
Buttons
Use a straightened paper clip or something similar to push the recessed
buttons.
RESET button
Short push turns the controller off when working on battery
The controller has a battery that keeps it operational even if it’s
disconnected from a wall outlet. To fully turn off the controller, push the
RESET button. The 3 LED lights will blink for about a second and the
controller switches off.
Use this button also to clear the most recent settings (the Owner number
will remain unchanged).
TEST button
Short push turns the heat pump ON/OFF
Use the TEST button to confirm that the IR beam from the controller
reaches the heat pump.
To Next Page
Loading...
