32
Alarm messages setup
The Owner can change the default values of the conditions on which
alarm messages are sent. For example, SMS “9713” lowers the room
temperature value at which “LOW TEMPERATURE” SMS is sent from the
default 5 °C to 3 °C.
Setup SMS
command you
send
Response
SMS format
Combi Control function you activate Default
values
971xx* SETUP
temperature treshold for
„LOW TEMPERATURE” message
5 °C
972xx* SETUP
“NO POWER” message blackout
in hours
24 h
973xx* SETUP
“SERVICE” message interval
in days
180 days
* xx marks the place of the numeric value
The „LOW TEMPERATURE” parameters (971) can be between 0-16
The
“NO POWER” parameters (972) can be between 0-48
The
“SERVICE” parameters (973) can be between 0-360