Toshiba D-VR16SB - Basic Setup; Initial setting

Basic Setup
30 EN
Initial setting
You need to follow these steps when you turn this unit
on for the first time.
1) Press [I/
y
ON/STANDBY].
2) Turn the TV on. Select the input to which the
unit is connected.
Initial Setting menu will automatically appear.
3) Press [ENTER] to start Channel Tuning.
The unit will start getting channels available in your
area.
4) After channel setting is finished, “Clock
Setting” will appear. Then press [ENTER].
Clock Setting menu will appear.
5) Press [ENTER] again, then follow the steps 4 to
5 on page 34 in “Manual Clock Setting”.
Initial Setting
Channel Tuning
Initial Setting
Clock Setting
04BasicsetupBD.indd3004BasicsetupBD.indd30 2006/03/2414:46:422006/03/2414:46:42