Toshiba D-VR16SB - Setting External Input Audio; Setting Bilingual Recording Audio

Recording
44 EN
Setting External Input Audio Setting Bilingual Recording Audio
Selecting the Recording format (cont’d)
When the external input audio is a bilingual broadcast,
you can choose “Stereo” or “Bilingual” to record on a
DVD.
1) In stop mode, press [SETUP].
2) Select “Recording” using [K / L], then press
[ENTER].
Recording menu will appear.
3) Select “External Input Audio” using [K / L],
then press [ENTER].
4) Select “Stereo” or “Bilingual” using [K / L],
then press [ENTER].
“Stereo” is selected as a default.
5) Press [SETUP] to exit.
Notes
• If you select “Stereo”:
The audio will be recorded as stereo audio.
• If you select “Bilingual”:
The audio will be recorded as bilingual audio (see “Setting
Bilingual Recording Audio” for more detail).
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting
Recording
Auto Finalise
Satellite Link
Bilingual Recording Audio
External Input Audio
Auto Chapter
OFF
15 minutes
Main
Stereo
Recording Audio Select (XP)
Dolby Digital
Dubbing Mode
VCR DVD
VCR DVD
External Input Audio
Bilingual
Stereo
VCR DVD
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in Video mode.
1) In stop mode, press [SETUP].
2) Select “Recording” using [K / L], then press
[ENTER].
3) Select “Bilingual Recording Audio” using
[K / L], then press [ENTER].
4) Select “Main” or “Sub” using [K / L], then
press [ENTER].
5) Press [SETUP] to exit.
Note
• If you are recording onto a VR mode disc, both “Main” and
“Sub” will be recorded regardless of your setting here. And
when you play back, you can choose either audio format
or a combination of both as your playback audio.
Sub
Main
Bilingual Recording Audio
DVD
05RecordingBD.indd4405RecordingBD.indd44 2006/03/2416:08:122006/03/2416:08:12