To Next PageTo Next PageWhy certain DVC functions cannot operate on Toshiba DVR?
If certain functions of the DVC do not operate with your Toshiba DVR, it may be due to the type of DVC being used. Some functions are not supported depending on the DVC. For example, if the DVC does not support slow playback mode, the slow playback function will be disabled. Also, with DV(AV4), the disc display menu will not appear unless disc playback is executed.
How to switch DV audio signal on Toshiba DVR?
If the DV audio signal cannot be switched on your Toshiba DVR, note that for recording with the DVC, the recording audio signal can be set to either 12 bits or 16 bits. However, when 16-bit recording mode is selected, the audio signal cannot be switched. To record an audio signal, set it to 12 bits.
What to do if cannot watch DVB and analogue channels on Toshiba DVR?
To watch DVB and analogue channels after auto tuning on your Toshiba DVR, first confirm that the antenna cable is connected correctly and try to tune again. If you move the unit to a different area, you will need to perform auto tuning again.
Why clock and channel settings cannot be performed on Toshiba DVR?
If “Clock” setting and “Channel” setting cannot be performed on your Toshiba DVR, it is likely because a recording is currently in progress. These operations cannot be performed during recording.
How to fix only specific channels do not appear on Toshiba DVR?
If only specific channels do not appear on your Toshiba DVR, it is possible that these channels are set to be skipped. Check the settings to ensure these channels are not set to be skipped.
General| Tuner | NTSC |
|---|---|
| Audio Recording System | Dolby Digital |
| Output Resolution | 480i |
| Remote Control | Yes |
| Playback Formats | DVD-R, DVD-RW, DVD+R, DVD+RW |
| Video Recording System | MPEG-2 |
| Inputs | Composite, S-Video |
| Outputs | Composite, S-Video |
| Weight | 2.7 kg |
