User’s Manual 7-1
Chapter 7
HWSetup
This chapter explains how to use the TOSHIBA HWSetup program to
configure your computer, and provides information on settings for various
functions.
Accessing HWSetup
To run the HW Setup program, click Start → All Programs → TOSHIBA →
Tools & Utilities → HWSetup.
HWSetup window
The HWSetup window contains a number of tabs (General, Password, Boot
Priority and LAN) to allow specific functions of the computer to be
configured.
In addition there are also three buttons: OK, Cancel and Apply.
General
This window displays the BIOS/EC version and contains two buttons:
Default and About.
OK Accepts your changes and closes the HWSetup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the
HWSetup window.
Default Return all HWSetup values to the factory
settings.
About Display the HWSetup version.
To Next Page
Loading...
