User’s Manual 2-16
The Grand Tour
Indicators
This section describes the LED functions.
System indicators
The system indicator next to the icon will glow differently with a difference
operation.
Figure 2-10 System indicators
Clear Deletes entered numbers, letters or symbols.
Enter The OK button on the remote controller has the
same functions.
Red, Green, Yellow
and Blue buttons
It jumps to a registration link.
These buttons are not provided with some
models.
Power indicator When connected to the AC adaptor and the
computer is not on, this indicator glows amber.
When the computer is turned on, this indicator
glows white. However, if you turn the computer
into Sleep Mode, this indicator will blink amber -
approximately two seconds on, two seconds off.
Hard Disk Drive/
Optical Disc Drive/
Memory Media slot
indicator
When accessing the internal hard disk drive,
optical disc drive or memory media cards, this
indicator blinks white.
Display off indicator This indicator shows the status of the display
panel. When the display is turned off by pressing
the Display off button on the right side, the
indicator will glow white.
No-function indicator This indicator always show off with no effect.
To Next Page
Loading...
