User’s Manual 1-7
Getting Started
3. Close the battery cover.
Installing the battery of the keyboard
1. Open the battery cover on your wireless keyboard.
2. Put two AA batteries into the battery groove.
Figure 1-6 Installing the battery of the keyboard
3. Close the battery cover.
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Monitoring of power condition
section in Chapter 6, Power and Power-Up Modes for more information.
You can turn on the power by one of the following ways:
■ Press and hold the computer’s power button for two or three seconds.
1. Battery cover
2. Battery
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section Starting
up for the first time for more information.
■ Volume cannot be adjusted during Windows Setup.
To Next Page
Loading...
