EasyManua.ls Logo

Toshiba e-Studio 202S - Page 67

Toshiba e-Studio 202S
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
9
*1 When standard 8-1/2" x 11" (A4) paper is used under the operating conditions.
*2 Feed paper lengthwise only.
*3 Leading and trailing edges.
*4 Along the other edges in totals.
*5 When making multiple duplex copies, the copy speed will vary based on the environment
conditions.
*6 Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11"
(A4) plain paper in the tray 1 and performing continuous one-sided printing of the same
page.
*7
The first-copy time is measured after the power save indicator turns off following power on,
using the document glass with the polygon rotating in the copy ready state and "Selection of
copy start state" set to ON in the user programs (8-1/2" x 11" (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
The time from power on until the first copy is output varies depending on the installation site
and the state of the machine in use.
*8 Not including toner cartridge.
Bit depth 1 bit or 8 bit/pixel
Sensor Color CCD
Scanning speed Max. 2.88ms/line
Memory 8 MB
Power supply
Local voltage ±10% (For this machine's power supply requirement,
see the name plate located on the back of the machine.)
Power consumption Max. 1.0kW
Overall
dimensions
Width 31-5/8" (802mm)
Depth 17-5/8" (445mm)
Weight
(Approximately) *
8
36.5 lbs. (16.6kg)
Unit
dimensions
Width 20-1/2" (518mm)
Depth 17-5/8" (445mm)
Height 11-3/4" (298mm)
Operating conditions
Temperature: 50°F to 86°F (10°C to 30°C)
Humidity: 20% to 85%
Emulation GDI
Interface port USB interface (USB 2.0 Full Speed)
Noise level
Sound power level
LwA
Copying mode: 6.2B
Standby mode: 3.2B
Sound pressure level
LpA (reference) (Bystander positions)
Copying mode: 48dB(A)
Standby mode: 16dB(A)
Sound pressure level
LpA (reference) (Operator position)
Copying mode: 52dB(A)
Standby mode: 16dB(A)
Noise emission measurement in accordance with ISO7779.
Emission
concentration
(measured according
to RAL-UZ122 : Edition
Jun. 2006)
Ozone: 1.5 mg/h or less
Dust: 4.0 mg/h or less
Styrene: 1.0 mg/h or less
Benzene: 0.05mg/h or less
TVOC(Printing): 10mg/h or less
TVOC(Pre-Operating): 1mg/h or less

Table of Contents

Other manuals for Toshiba e-Studio 202S

Related product manuals