Toshiba E-studio 2050c Copying Guide

3.BASIC COPY MODES
Selecting Finishing Mode 89
3 BASIC COPY MODES
 Rotate sort mode
When you make more than one set of copies, one set can be made to exit on top of another set, alternating in
portrait and landscape directions. This mode is called the rotate sort mode. Use 2 drawers and 2 stacks of
paper of the same size. Place one stack of paper in one drawer in a portrait direction and place the other in
another drawer in a landscape direction before you start copying.
y A4, B5 and LT sized paper placed on the drawer or bypass tray can be used.
y The rotate sort mode is not available when Automatic Paper Selection is selected.
1
Place paper in the drawer(s).
Place one stack of paper in one drawer in a portrait direction and place the other in another drawer
in a landscape direction.
2
Place the original(s).
3
Press [FINISHING] on the touch panel.

Toshiba E-studio 2050c Specifications

General

Print Technology	Laser
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Color Printing	Yes
Duplex Printing	Yes
Paper Size	A3, A4, A5, B4, B5
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Dimensions	575 x 586 x 662 mm
Interface	USB, Ethernet
Scan Type	Flatbed