Toshiba e-STUDIO 207L - How to Make Copies; Placing Originals for Copying

2
Basic Copying Operation
21
Enlargement and reduction
copying
Press [ZOOM].
1
1
Select the desired paper size,
2
press [AMS], and then
3
[OK].
22
Align the originals according to the desired paper
size and direction. The size of the originals will be
automatically determined.
When copying a set of originals whose sizes and
directions are dierent, press [MIXED SIZE].
Selecting nishing mode
(sorting)
Press [FINISHING].
1
1
Press [SORT] and then
2
[OK].
2
• To set the staple and the hole punch mode, the
optional nishing devices are needed. For the
necessary options, see the following page:
& P.72 “Options” in this manual.
• For example, when “Original 1”, “Original 2” and
“Original 3” are copied in 2 sets, they can be
made as follows.
When you use the Reversing Automatic Document
Feeder (optional), the sorting mode is
automatically set.
2
3
3
1
2
3
1
2
3
1
2
3
1
2
3
1
1
2
Sort
Group