Toshiba e-STUDIO 207L - Making Copies; Basic Copying Procedure

2 HOW TO MAKE COPIES
28 Making Copies
Making Copies
 Basic copying procedure
Make copies following the procedure below.
1
Make sure that paper is placed in the drawer(s).
For the types and sizes of acceptable paper and how to place it, see the following pages:
 P.11 “Acceptable copy paper”
 P.13 “Placing paper in drawers”
 P.19 “Placing paper in the Large Capacity Feeder (optional)”
2
Place the original(s).
For the types and sizes of originals and how to place them, see the following pages:
 P.22 “Acceptable originals”
 P.25 “Using the RADF (Reversing Automatic Document Feeder, optional)”
 P.23 “Placing originals on the original glass”
 P.24 “Book-type originals”
3
Key in the desired number of copies if you want more than one copy.
Press the [CLEAR] button on the control panel to delete the number keyed in.
4
Select the copy modes as required.
 P.51 “BASIC COPY MODES”
 P.91 “EDITING FUNCTIONS”
 P.127 “IMAGE ADJUSTMENT”
OR
2
1
RADF
(
optional
)
Original glass
534