5 Using Template
78 Scanning Using Template
5
Press the template button that you want to recall.
y If you select a template that the automatic start function is enabled (which the
icon is displayed in the lower left corner of the button) and the password is not
set, the scanning operation is automatically started and finish the operation. If the
password is set to the template, you must enter the password. In that case, continue
to the next step.
y If you select a template that the automatic start function is disabled, the basic scan
menu is displayed. In that case, continue the operation.
6
If the password is set to the selected template, the password entry
screen is displayed. Enter the 5-digit password using the digital
keys and press the [ENTER] button.
y If you select the template that the automatic start function is enabled, the scanning
operation is automatically started and finish the operation.
To Next Page
Loading...
