1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 59
1 TROUBLESHOOTING FOR THE HARDWARE
3
Remove the staple cartridge.
4
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
5
After the transparent cover is lifted, remove the empty
staple case.
6
Fit the new staple case into the staple cartridge.
Push the staple case into the cartridge until it clicks.
In this step, do not remove the seal bundling the staples.
7
Push the transparent cover down to its original
position, and pull out the seal bundling the staples
2
1
2
1
To Next Page
Loading...
