Chapter 2 BASIC OPERATION
22
Setting duplex copy
Press [2-SIDED].
Select the desired duplex mode and
then
press [OK].
You can choose from 5 types.
For example, the following settings can be made.
1-sided original to 2
-sided copy:
2-sided original to 2-sided copy:
Setting original mode
Press [ORIGINAL MODE].
Select the desired original mode
and then
press [OK].
The selectable original mode diers depending on
the color mode. In the full color mode, you can
choose from 5 types.
For example, the following settings can be made.
O
riginals with te
xt and
photographs mixed:
e-STUDIO2051C/2551C: This mode is available only
when the Automatic Duplex Unit is installed.