Chapter 2 BASIC OPERATION
28
Basic Scanning Operation
The basic operation of the scanning function, how to store the scanned data in a shared folder and store these data in a
Windows computer is described as follows.
Press the [SCAN] button on the control
panel.
Press [FILE] on the touch panel.
Storing the scanned data in a shared folder
Set [FILE NAME],
FILE FORMAT,
etc. and then
press [OK].
Place the original(s).
& P.16 “Placing originals” in this manual
Press [SCAN] on the touch panel.
Scanning starts.
Change the scan settings as required.
This operation is available only when the hard disk is installed in the equipment.