7 CONFIRMING JOB STATUS
204 Confirming Copy Job Status
Confirming the information of a skipped job
Copy jobs may not be performed because the specified paper or staples have run out, etc. These will be
suspended and the next job will be performed (Job Skip function). Check on the touch panel how you can
recover the suspended jobs. Available only when the hard disk is installed.
1
Select the skipped job in the print job list, and press [RECOVERY INFORMATION].
2
Resolve the cause of the skip following the instructions on the screen.
If multiple causes exist, the second cause is displayed after you resolve the first one. Resolve all
causes accordingly.
To Next Page
Loading...
Need help?
General
