1 TROUBLESHOOTING FOR THE HARDWARE
42 Clearing a Paper Misfeed
2
While holding the green lever, move the finisher to the
left until it stops.
3
Pull down the green lever on the right-hand unit of the
finisher.
The paper exit of the equipment opens.
4
Turn the green dial clockwise to send the paper and
remove it.
5
Return the green lever to its original position.
6
When the Hole Punch Unit is installed and used for
punching holes, while pulling the green dial toward
you, turn it to align the yellow marks on the parts.
To Next Page
Loading...
