Toshiba e-STUDIO 307 - Refilling Saddle Stitch Unit Staples

1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 71
1 TROUBLESHOOTING FOR THE HARDWARE
 Refilling Saddle Stitch unit staples
 Saddle Stitch finisher MJ-1108
4
Fit the new staple case into the staple cartridge.
Push the staple case hook into the staple cartridge socket until
you hear a click.
5
Fit the staple cartridge into the stapler.
Insert the staple cartridge until it is caught by the latch and fixed
with a click.
6
Close the front cover of the finisher.
1
Open the front cover of the finisher, and pull out the
Saddle Stitch unit until it stops.