Toshiba e-STUDIO 307 - Paper Misfeed in the Saddle Stitch Finisher MJ-1033 and the Hole Punch Unit MJ-6008 (both Optional)

1 TROUBLESHOOTING FOR THE HARDWARE
44 Clearing a Paper Misfeed
 Paper misfeed in the Saddle Stitch Finisher MJ-1033 and the Hole Punch Unit MJ-6008 (both optional)
12
Return the Hole Punch Unit to its original position.
13
Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the
finisher when closing it.
They could be caught and this could injure you.
14
Close the front cover of the finisher.
1
Remove the misfed paper from the receiving tray
section.
2
Open the front cover of the finisher.