1 Setting up Network Server
28 Setting up NetWare Print Server
y To do this, iManager must be installed on your NetWare server. For information about install-
ing iManager, see the documentation for iManager that is provided by Novell, Inc.
y You must use a supported browser to access iManager. The supported browsers vary
depending on the version of iManager that you installed.
For iManager 1.5.2
- Microsoft Internet Explorer 5.5 or later (Recommended)
- Netscape 6.2 or later
For iManager 2.0.x
- Microsoft Internet Explorer 6 SP1 or later (Recommended)
- Netscape 7.1 or later
- Mozilla 1.4 or later
1
Enter the URL “https://<IP address>:2200” in the address bar of
your browser, and click the iManager link for the NetWare server
under eDirectory iManager.
2
Enter the user name and password to log in to iManager.
3
Click [iPrint Management] in the Contents Panel and click [Manage
Printer].
4
Select the printer that you created for the equipment.
5
Click [Client Support] and click [IPP Support].
6
Check the “Enable IPP Access” check box.
7
If you want to secure printing, check the “Require Security” check
box.
y When the “Require Security” option is enabled, users must be authenticated to eDi-
rectory using the user name and password.
8
Click [Apply] and [OK] to save settings.
y The IPPSRVR.NLM is automatically loaded.
To Next Page
Loading...
