1 Setting up Network Server
36 Setting up LDAP Authentication Service
7. Make sure that the Dynamic update from DDNS for the Reverse Lookup Zones.
- Right-click the domain in the Forward Lookup Zones and select [Properties].
- Make sure the “Allow dynamic updates?” option is set to “Yes” (for Windows 2000
Server) or “Nonsecure and Secure” (for Windows Server 2003).
If setting of Windows Server 2003 is “Secure” mode or “None” for this DDNS function, you
need to set the correct primary login name and primary password for update the DNS server
by DDNS, or add the equipment’s host name manually in the Reversed Lookup Zone.
Configuring the Equipment Using TopAccess
From TopAccess, you must configure the Date & Time, LDAP Session, DNS Session, DDNS
Session and others.
To Next Page
Loading...
