1 TROUBLESHOOTING FOR THE HARDWARE
38 Clearing a Staple Jam
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the Finisher or Saddle Stitch unit, clear the jam following the procedure
below.
P.38 “Staple jam in the Finisher”
P.43 “Staple jam in the Saddle Stitch unit”
Staple jam in the Finisher
Finisher MJ-1101
1
Open the front cover of the Finisher.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the jammed staples.
A
To Next Page
Loading...
