1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 41
1 TROUBLESHOOTING FOR THE HARDWARE
Hanging Finisher MJ-1031 (optional)
Be careful not to let your fingers be caught between the equipment and the Finisher (optional).
This could injure you.
1
Separate the Finisher from the equipment.
Press the lever to unlock the Finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
Finisher.
2
Open the staple cartridge unit cover.
3
Remove the staple cartridge.
4
Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area.
The actual needle point could cause you personal injury.
A
To Next Page
Loading...
