e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-1
3.1 To Maintain a Steady Color Balance
Before the adjustment After the adjustment
The color balance varies according to a change
in the environment or a lapse of time.
The color balance is constantly maintained.
Explanation
The color balance varies according to a change in the environment, replacement of the consumables and so forth.
Periodically adjust the color reproducibility (automatic calibration), in order to constantly maintain a steady
color balance on the printouts.
Automatic calibration is the basic adjustment to accurately reproduce colors on the printouts. When you would
like to accurately reproduce the desired hue or when you have replaced the consumables and changed the
operating conditions, perform automatic calibration to ensure the color reproducibility.
Procedures
* Perform the adjustment in accordance with the procedures below.
* Only the service technician must use procedure (1).
* Both the service technician and the user can use procedure (2).
3. Printer-specific Adjustments
To Next Page
Loading...
