Toshiba e-STUDIO 3520c - To Change the Threshold in Auto Color Mode

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
2-61
2.15 To Change the Threshold in Auto Color Mode
(To change the threshold between the Full Color mode and the Black mode to meet the user ’ s
needs)
Original
Before the adjustment After the adjustment
It is copied in the Full color mode. Changing the threshold value will allow a
colored original to be copied in the Black
mode.
 Explanation
When the Auto color mode is selected, it will be automatically determined whether an original is colored or
black-and-white. Then it will be copied in the Full color mode or the Black mode. But adjust the threshold
value, in order to change the threshold between the Black mode and the Full color mode and suit the preferences
of the user.
Copied in the Auto color mode
2. Copier-specific Adjustments