e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-97
(2) Change the "Color balance" option on the printer driver.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab. Change
the option in the "Color Balance" tab.
* Set the value, while checking the printouts until the optimum value is obtained.
- "Color Balance" tab: Change the "All Colors" or "Each Color" option.
- To make detailed setting, you can set it by marking "Detail" checkbox. (Same as Auto color or Full color
mode)
PCL6 PS3 XPS
3. Printer-specific Adjustments
To Next Page
Loading...
