Page 6
Overview of Operator LCD Display
BASIC SCREEN
When the power is turned on, and READY is displayed, the basic screen of the copy
function is shown on the touch panel. On the screen, currently set functions, selected
functions and the copier status are shown via messages and illustrations. (The contents
of the touch panel screens in this manual show the equipment with all options.)
The following information is shown here:
(1) Message (6) Date and time
(2) Reproduction ratio (7) Set functions confirmation button
(3) Total copy quantity (8) Function setting area
(4) Currently selected drawer size (9) Index buttons
(5) Remaining paper level
EDIT SCREEN
The following information is shown here:
y IMAGE SHIFT y 2 IN 1 / 4 IN 1 y COVER SHEET
y EDGE ERASE y MAGAZINE SORT y SHEET INSERTION
y BOOK CENTER ERASE y EDITING y TIME STAMP
y DUAL PAGE y X Y ZOOM y PAGE NUMBER
y NEXT
(additional screens
behind this one)
To Next Page
Loading...
