1.TROUBLESHOOTING FOR THE HARDWARE
Replacing a Toner Cartridge 51
1 TROUBLESHOOTING FOR THE HARDWARE
2
Pull out the color toner cartridge to be replaced.
1) Put your fingers in the upper groove and slowly pull out the toner
cartridge.
2) When the cartridge has been pulled out more than halfway, support
it with your hand while pulling it straight out.
Never attempt to incinerate toner cartridges.
Dispose of used toner cartridges and waste toner boxes in
accordance with local regulations.
3
Shake the new toner cartridge strongly with its label
side down to loosen the toner inside.
4
Pull out the seal in the direction of the arrow.
5
Insert the new toner cartridge straight until it stops.
6
Close the front cover pressing both edges.
KCMY
21
10
To Next Page
Loading...
