e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 18
3. Printer-specific Adjustments
Mac
For Macintosh
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Select "Black - Auto" from among the "Pure Black and Gray" options.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
10.2.x "Printer Features" Ö "Feature Sets: Color settings 2" Ö "Pure Black and Gray"
10.3.x / 10.4.x/10.5x "Color Settings 1" Ö "Pure Black and Gray"
Precautions after the completion of the adjustment
The adjustment allows gray areas always to be reproduced using all color toners (C, M, Y and K). As a result,
undesired colors may look blended, depending on the print image. Therefore, carefully perform the adjustment,
while checking the printouts.
To Next Page
Loading...
