e-STUDIO2040C/2540C/3040C/3540C/4540C © 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 36
6. Printer-specific Adjustments (GA-1211)
6.5.2 To Adjust Tone of Black Areas on Text or Line Arts
The tone of black areas that are defined with a parameter ((R, G, B) = (0, 0, 0)) can be adjusted.
Procedures
* Both the service technician and the user can perform all adjustments.
* All the adjustments will be effective only when images are printed with a PS3 printer driver in the Full color
mode.
(1) Open the printer driver properties and then click the [Color] icon on the [Fiery Printing] tab page.
(2) Click [Expert Settings] of the Print Mode setting.
• The Expert Color Settings menu appears.
(2)
(1)
To Next Page
Loading...
