2 HOW TO MAKE COPIES
22 Placing Originals
Placing Originals
Acceptable originals
When the RADF (Reversing Automatic Document Feeder, optional) is used, 2-sided originals can be
automatically scanned one sheet after another. When the original glass is used, originals such as OHP films,
tracing paper, booklet or 3-dimensional objects, that cannot be placed on the RADF can be scanned, as well
as plain paper.
Automatic size detection does not work properly when A/B format originals are used in equipment for
North America. It does not work properly when LT format originals are used in equipment other than
that for North America.
Automatic size detection does not work properly when K format paper is used for printing. (K format is a
standard paper size in China.)
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Be sure to place ST-size or A5-size originals in a landscape direction when using the RADF (optional).
A maximum of 1000 sheets can be scanned per 1 copy job or up until the embedded memory becomes
full.
Forgery prevention function
This equipment has a forgery prevention function. Therefore, scan or copy function might not operate
correctly.
Location Maximum size Paper weight
Acceptable sizes for
automatic size detection
Original glass
Length: 297 mm
(11.69")
Width: 432 mm
(17.01")
—
Other than North America:
A3, A4, A4-R, A5-R, B4, B5,
B5-R
North America: LD, LG, LT,
LT-R, ST-R
RADF (optional)
1-sided originals: 35 -
157 g/m
2
(9.3 - 41.8 lb.)
2-sided originals: 50 -
157 g/m
2
(13.3 - 41.8 lb.)
Other than North America:
A3, A4, A4-R, A5-R, B4, B5,
B5-R, FOLIO
North America: LD, LG, LT,
LT-R, ST-R, COMP
To Next Page
Loading...
