2.HOW TO MAKE COPIES
Bypass Copying 45
2 HOW TO MAKE COPIES
6
Press the button of the same size as the envelope you placed on the bypass tray.
The size of the selected envelope will be registered as an “OTHER” size.
7
Press [OTHER] under “COPY”.
The paper size is now set to the size of the envelope placed on the bypass tray. The paper type is
automatically set to [ENVELOPE].
8
Select other copy modes as required, and then press the [START] button on the control
panel.
Copying starts. When the Finisher MJ-1107 (optional) or the Saddle Stitch Finisher MJ-1108/MJ-1033
(optional) is installed, the envelope exits to the exit tray of the equipment.
When the Inner Finisher MJ-1032N (optional) is installed, the envelope exits to the receiving tray of the
finisher.
Every 10 copies, take the envelopes out from the exit tray.
To Next Page
Loading...
