1 TROUBLESHOOTING FOR THE HARDWARE
36 Clearing a Staple Jam
7
Close the front cover of the finisher.
3
Lower the guide while holding the knob.
Do not touch the stapling area (A in the figure).
The actual needle point could cause you personal injury.
4
Remove all jammed staples with something sharp.
5
Holding the knob, raise the guide, and return it to its
original position.
6
Fit the staple cartridge into the stapler.
Insert the staple cartridge until you hear a click sound (the staple
cartridge is latched). Then lower the lever slightly.
2
1
To Next Page
Loading...
Need help?
General
